Accessories
Hi-Rigger
The Hi-Rigger drive system is an industry-first powered hoist that eliminates the need for workers to manually lower and raise heavy wire rope over the side of tall buildings when ground rigging a suspended stage.
- Safer: No need for worker handling of wire rope at the roof edge. Tricky suspension point connections outboard of the wall face are also avoided.
- Faster: Capable of raising and lowering up to 800 ft of wire rope at 100 ft per minute
- Features lightweight modular aluminum components for ease of transportation, setup, and disassembly.
- Mounts tool-free onto WINSAFE’s modular outrigger beam system.
- Designed to be left in place during platform operation.
- Provides off-the-job storage solution for
- Total system weight – 64 lbs.
Available Items
IA2091 – Reel Frame
IA2132 – Reel
WSOR244 – Sheave Bracket Assembly
IA1421 – Portable Drive
Outrigger Beam Hold Down Brackets
Outrigger Beam Hold Down Brackets offer an alternative to counterweights to provide outrigger beam resistance to overturning.
Secure to concrete slab using two Ø5/8″ Hilti HDA anchors (or equivalent) (not included) to provide equivalent resistance to overturning, as determined by the application.
(Work with anchor supplier to determine appropriate grip length to suit concrete composition and condition. Safety tie-backs still required.).
- Bolts or pins to the beam through the rear splice hole.
- Carbon steel construction.
- Cold galvanized finish.
Available Model
SP1276 – Beam Hold Down Bracket
Temporary Tie-Backs
Temporary Tie-Back Anchors offer a quick and economical tie-back solution.
Secure to concrete slab using four Ø5/8″ Hilti HDA anchors (or equivalent) (not included).
(Work with anchor supplier to determine appropriate grip length to suit concrete composition and condition.)
- Carbon steel construction.
- Cold galvanized finish.
- 5,000 lbs load rating.
- May be oriented vertically (wall-mounted) or horizontally (roof mounted).
- Can be used for equipment tie-back or as a fall arrest anchor.
Available Model
SP1292 – Tie-Back Anchor, Plate Style
Temporary Tie-Back Anchors offer a quick and economical tie-back solution.
Secure through a 1″ hole in concrete slab up to 14″ thick.
- Carbon steel construction.
- Cold galvanized finish.
- 5,000 lbs load rating.
- Can be used for equipment tie-back or as a fall arrest anchor.
Available Model
SP1510 – Tie-Back Anchor, Through Bolt-Style
Drop Through Suspension Support
A Drop Through Suspension Support provides support for a suspension line from above, through an opening (such as a hole or through a grate).
The suspension line can be passed through the opening and is then shackled to the support’s removable snap lock pin.
The pin is located high enough above the supporting surface so as not to interfere with any of the wire rope termination hardware.
Available Model
SP629 – Drop Through Suspension Support